£22.64 ex. VAT
We have a £35 minimum order policy. Any orders under this value will incur an additional fee to adjust it to the minimum.
If you are not based in the UK please
get in touch to discuss your order.
Specification
Thickness:
Width:
Length:
Material:
Specification:
Pieces:
We can also supply special widths and lengths - please contact us direct with your requirements.
Temper rolled Stainless Spring Steel W.-Nr. 1.4310 – X10CrNi 18-8 – AISI 301
Composition: C: 0,05-0,15%, Si: max. 2,00%, Mn: max. 2,00%, P: max. 0,045%, S:
max. 0,015%, Cr: 16-19%, Ni: 6-9,5%, Mo: max. 0,80% Condition: temper rolled,
surface 2H, wave height max. 1,0 mm, cut edges.
The alloy 1.4310 (AISI 301) has a good corrosion resistance due to a content of
17% Chromium and 7% Nickel. A high tensile strength is obtained by cold rolling.
Compared to alloy 1.4301 (AISI 304) a much higher tensile strength of more than
2000 N/mm² can be reached. Because of this, the alloy 1.4310 is suitable for stainless
feeler gage stock, precision foils, stainless springs and parts of higher strength.